Kenworth Driveline Recall: Warning Signs to Watch For
A Kenworth driveline defect has prompted PACCAR to recall 982 trucks over concerns that the driveline could separate, causing power loss and risks of a crash.
Kenworth Recalls 982 Trucks Over Driveline Safety Risk
PACCAR has issued a recall affecting 982 Kenworth trucks from the 2027 model year due to a Kenworth driveline defect that could cause the driveline to come apart. The problem could lead to a sudden loss of drive power and increase the risk of a crash.
The recall affects certain Kenworth T280, T380, T680, T880, and W990 models. Most of the affected vehicles are T680 tractors, which are commonly used to haul freight across the country.
According to the National Highway Traffic Safety Administration (NHTSA), the issue involves a missing part in the driveline. PACCAR has also identified possible warning signs that drivers may notice before a failure occurs.
The recall was filed on November 11, 2026, under NHTSA campaign number 26V743000.
Which Kenworth Trucks Are Included in the Recall?
The recall covers five Kenworth models built during August and September 2026. All affected vehicles are from the 2027 model year.
PACCAR’s report lists the following trucks:
| Kenworth Model | Potentially Affected Trucks |
|---|---|
| T680 | 716 |
| T880 | 246 |
| W990 | 18 |
| T380 | 1 |
| T280 | 1 |
| Total | 982 |
The T680 accounts for nearly 73% of the recalled vehicles. Together, the T680 and T880 make up 962 of the 982 trucks.
However, not every truck from these models is affected. The recall applies only to certain vehicles built during specific production periods.
PACCAR estimates that 0.3% of the recalled trucks may have the defect. That equals roughly three trucks out of the 982 being recalled. Still, inspections are needed to find which trucks have the missing part.
How the Kenworth Driveline Defect Could Affect Drivers
The problem involves a small part called a snap ring. This ring helps hold parts of the truck’s driveline in place.
According to PACCAR, some drivelines may have been built without the snap ring in the slip yoke assembly.
Without this part, other components may move out of place while the truck is running. This could allow a bearing cup to separate and cause part or all of the driveline to come loose.
A driveline failure could cause the truck to lose power to its drive wheels. If this happens on a highway, the driver may have to deal with a disabled truck in traffic.
Loose driveline parts could also fall onto the road or strike other vehicles. NHTSA warns that these parts could create a crash or injury risk.
A similar issue led to a separate recall of 3,894 Freightliner and Western Star trucks in November 2026. That recall also involves a potentially missing snap ring that could allow the driveline to separate. Both recalls involve serious safety risks, but they are separate recall actions.
Warning Signs of a Possible Kenworth Driveline Problem
PACCAR’s detailed recall report identifies two possible signs of a driveline problem:
- Unusual driveline vibration.
- Noise coming from the driveline.
These symptoms may occur when parts begin to move out of their proper position.
However, the report does not say that every affected truck will show warning signs before a failure.
Drivers operating one of the affected models should report unusual vibration or driveline noise to their fleet’s maintenance department or a qualified service provider.
Such symptoms can have several causes. An inspection is needed to determine whether they are linked to this recall.
How PACCAR Discovered the Driveline Defect
PACCAR’s investigation found that the missing snap rings were linked to a manufacturing problem at a supplier assembly station.
The company reported that a worker at the station did not follow manufacturing procedures between July 14 and August 21, 2026.
The affected parts came from Meritor/Cummins, a supplier of commercial truck driveline systems.
The first missing snap ring was found at a Kenworth manufacturing plant on August 8. Another was discovered during an inspection on August 12.
On September 15, a lead truck transporting new vehicles from the factory reported a partially dropped driveline in Canada. PACCAR then held certain other trucks in transit for inspection.
Further inspections and testing continued through October. On November 4, PACCAR’s safety committee decided to begin a recall.
As of that date, the company had received one potentially related field report and no warranty claims. No injuries or deaths had been reported.
Other Recent PACCAR Recalls Affect Truck Drivers
This is not the only recent PACCAR recall involving Kenworth trucks.
In September, PACCAR announced a recall involving seat wiring on 811 Kenworth and Peterbilt trucks. That defect could cause an electrical short and increase the risk of fire.
Another PACCAR recall involving faulty fuel hoses was announced in October. It affects 26,729 Kenworth and Peterbilt trucks and could lead to engine stalls or fuel leaks.
These recalls involve different parts and safety concerns. Each has its own list of affected vehicles and repair instructions.
When Will Kenworth Recall Notices Be Sent?
PACCAR expects to mail owner notification letters on January 10, 2027.
The company also plans to make affected Vehicle Identification Numbers (VINs) searchable through NHTSA’s recall system on that date.
The documents do not confirm whether dealers can identify all affected VINs before January 10. They also do not provide a specific timeline for when inspections and replacement parts will be available.
NHTSA recently announced new funding to improve vehicle safety recall notifications. The program aims to help states alert vehicle owners about unresolved recalls through registration systems. However, those improvements are not yet in place nationwide.
How Will the Kenworth Driveline Recall Be Repaired?
PACCAR says dealers will inspect the affected drivelines to determine whether the snap ring is present.
If the part is missing, the dealer will replace the driveline. The inspection and any required replacement will be performed at no cost to the vehicle owner.
Not every recalled truck will need a new driveline. The inspection will determine whether a replacement is required.
PACCAR has not provided an estimate for how long the inspection or repair will take.
For fleets, the recall could require extra maintenance planning. Owner-operators may also face downtime if their trucks need repairs.
Company drivers could experience changes in truck assignments or delivery schedules if affected equipment needs to be inspected or repaired. These are possible effects, not confirmed disruptions reported by PACCAR.
What Truck Drivers and Fleet Operators Should Know
The Kenworth driveline recall applies to a limited group of 2027 trucks, but the possible effects of the defect are serious.
Fleet maintenance teams can review their vehicle records and contact Kenworth to learn whether their trucks may be included.
Drivers who notice unusual driveline vibration or noise should have the problem checked promptly.
Owners can contact Kenworth customer service at 1-425-828-5888 and refer to manufacturer recall number 26PACK.
They can also visit the NHTSA recall lookup website for recall information.
The recall documents do not establish a blanket do-not-drive order for all 982 vehicles. However, any truck showing signs of a driveline problem should be checked by qualified maintenance personnel before further operation.
PACCAR’s planned notification date remains January 10, 2027. For affected drivers and fleets, the main concern is identifying potentially defective trucks and arranging the required inspections and repairs.
